Analytical Instruments

OV5 is the VELP solution for dispersing, homogenizing and mixing biological tissues, pharmaceutical products, cosmetics and food products. Wide selection of rotors and stators to match multiple applications.
  Stirring volume of up to 8 liters (water) as homogenizer
  Stirring volume of up to 40 liters (water) as high-speed mixer
  Handles fluids up to 10 000 mPa*s (cP)
  Speed variable from 10 000 to 30 000 rpm
  Shaft connects easily and quickly through a snap hook
  Rotor / stator configuration can be assembled in seconds
  Stainless steel shaft with PTFE seals
  Overload protection
  Smooth start and safety switch

Designed to meet current USP and ASTM specifications for tap density testingTwo Tapping Positions for 14mm and 3mm respectively with cylinder holders to hold 100 ml and 250 ml cylinders.The unique simultaneous tapping and rotating motion assures that the material is evenly packedCalculates results - Tapped Density, Compressibility Index, Hausner Ratio and Bulk Density.Balance Interface for sample weight transfer

Salient FeaturesMeets current specifications of USP, IP and other PharmacopoeiasOffers a count and time modeAutomatic discharge of the of the sample into individual sample tray after completion of each cycle10° tilting of drums as per USP recommendation for odd shaped tabletsEasy front loading systemSupports friability drum and abrasion drumCalculation of friability - percentage weight-lossBalance interface for sample weight transfer

Meets current specification of USP, IP, BP and other PharmacopoeiasIn DT1000, Single timer for both baskets with single drive and 20 X 2 line display.Specifically designed for use in the quality and production control of normal plain coated tablets & gelatin capsulesProgrammable Temperature & TimeMolded clear acrylic water bath with illumination for better visibilityAuto Park out facility for basket after run completionCapability for dual buffer disintegration testAudible, low water level alarm with indication on display for safetyExternal temperature sensors available for individual beakerProvision to identify the position of disintegrated tablet with laser marked numbers on basket assemblyProvision to lock individual tablet disintegration time by using external key board with basket numbers

CyberScan pH Tutor pH / oC • Simple to use • Up to 3-point Calibration • Automatic Buffer Recognition • +/- 0.01 pH Accuracy SIMPLE PUSH-BUTTON CALIBRATION Calibration is a quick 2-step procedure at the touch of buttons. With the choice of 2 universal pH buffer sets with auto-buffer recognition, calibration error is eliminated. Meter prompts next pH buffer value automatically. EASY-TO-READ DISPLAY Custom dual line LCD (Liquid Crystal Display) provides optimum view of both pH and Temperature values. SPLASH-PROOF TACTILE KEYPAD IP54-rated housing with splash-proof keypad protects the meter against accidental spills. ±0.01 pH ACCURACY The meter delivers ±0.01 full-range pH accuracy for repeatable and stable readings. AUTO/MANUAL TEMPERATURE COMPENSATION With the use of an optional temperature probe, ATC mode ensures reliable readings under varying temperature conditions. While in the MTC mode, meter delivers accurate results at 25 °C reference temperature. SELF-DIAGNOSIS This self-diagnostic meter prompts and guides user throughout with user-friendly message codes and graphical icons for easy operation. Electrode characteristics (pH slope/offset) can be viewed. ELECTRODE HOLDER (OPTIONAL) Electrode stand with swivel arm holds multiple electrodes and is a space saver. BACK PANEL Accessible neat panel for easy meter setup and cable connections. WARRANTY Eutech Instruments warrants its meter free from manufacturing defects for 1 years and electrodes for 6 months. METER SPECIFICATIONS CyberScan pH Tutor pH Range 0.00 to 14.00 pH Resolution 0.01 pH Accuracy ±0.01 pH Temperature Range 0.0 to 100 oC Resolution 0.1 oC Accuracy ±0.3 oC Temperature Compensation Automatic / Manual (0 to 100 oC) Default at 25 oC Temperature Offset Adjustment ±5.0 oC pH Buffer Options US Standard (pH 4.01, 7.00, 10.01) NIST Standard (pH 4.01, 6.86, 9.18) No. Of Calibration Points Up to 3 points Stability Indicator Yes (Ready) pH Slope & Offset Display Yes Self-diagnostic Messages Yes User reset Yes Display Custom Dual Line LCD Inputs BNC, phono Power Requirements 9V DC adapter, 120 VAC or 220 VAC, 500mA Dimension / Weight Meter: 18 x 23 x 6 cm ; 570g Boxed: 40 x 26 x 9 cm ; 1200g